Big Brake Kits

There's a point when your stock brakes are just not big enough for the job. Hard and regular track use and serious power will test the stock system to the limit and beyond and you may experience scary moments of brake fade, or just not enough power to anchor you around a track. All of our solutions allow both front and rear discs sizes to be increased with an option of callipers.

P5/HiSpec Motorsport BBK

Exclusively in conjunction with HiSpec Motorsport, P5 offer a proper 4-wheel solution to ensure the front/rear braking bias remains balanced. Based around the 4-piston Billet-4 calliper, this set-up is perfect for road use due to its fully dust sealed pistons, but on the track it's certainly no slouch and performs without a hint of fade. The front discs are increased to 285mm and the rear to 275mm, slotted and coated and mounted on billet aluminium mounting bells anodized black or gold. All mounting hardware is included and a set of custom stainless steel brake lines and pad options are available at extra cost.

P5 BBK-F Ultralite - £tbc
P5 BBK-R Ultralite - £tbc
P5 BBK Stainless Steel Brake Lines - £tbc

Good-Win Racing BBK

If you are looking for the best kit from the other side of the pond, then this is it. Again, this is a proper 4-wheel solution based around the forged Wilwood Dynalite 4-piston calliper, which is lighter than the Billet-4 but doesn't feature dust seals for the pistons. The slotted and coated front discs are 11" at the front and 10.75" at the rear and mounted on billet aluminium mounting bells coated black. The complete set-up includes everything you need down to a litre of brake fluid.

Good-Win Racing 4-Wheel BBK - £1249.00